3800W Anti-thunder Soft Start Power Supply Delay Board For Amplifier AC110V 100A

Description

Description:
The function of the soft start board is to reduce the instantaneous inrush current during startup, to reduce the impact of the machine on the power grid and to extend the life of the switch.
Lightning protection function:
The board is equipped with a gas discharge tube and has a lightning protection function. The gas discharge tube is composed of a pair of cold cathode plates which are separated from each other and enclosed in a ceramic tube filled with a certain inert gas (Ar).
The gas discharge tube is turned off under normal operating conditions, and its interelectrode resistance is above the megaohm level. When the surge voltage exceeds the withstand voltage of the circuit system, the gas discharge tube was breakdown and the arc discharge phenomenon occurs. Because the arc voltage is low, it is only several tens of volts, which can limit the further rise of the surge voltage in a short time.
The gas discharge tube uses the above principle to limit the surge voltage, and discharges the lightning transient overcurrent and limits the overvoltage to the circuit.
This board uses ultra-high current (100A) pure copper lead relays and large thermistor NTC 20D-20, the effective protection of the machine, to prevent excessive power-on current.
The board does not need auxiliary power supply, only two terminals, one is power supply input, the other is load output, very easy to use.
Working Principle:
When the power is turned on, power is supplied to the load through a negative temperature coefficient thermistor, as the thermistor temperature increases, the resistance drops, the voltage rises slowly, thus effectively inhibiting the inrush current impact on the line and other electrical appliances. About 2 seconds after the relay ttracts gathers, short circuit thermistor, the power supply through the relay contacts directly to the load, the load into the normal working condition.
Features:
【Name】 High-power soft-start power circuit board
【Relay】 RGL high power 100A large current copper feet relay
【Working Voltage】 AC 100V-125V
【Board Size】 95mm x 58mm x 30mm (L*W*H)
【Application】 Suitable for advanced audio power amplifier input , the use of power should be less than 3800W, Long time load working power is recommended at around 2000W
Packing List:
1pcs x High Power Power Supply Soft Start Board