HIGH SHANK adjustable bias binder foot fits BABYLOCK BROTHER JUKI JANOME PFAFF

Description

This Listing is for
a
Brand New
HIGH SHANK adjustable bias binding foot
Adjustable (from 3/8" to 13/16") guide folds bias tape around fabric edge as you stitch.  No need to sew twice!  Adjust guide from 5 mm to 20 mm to sew straight, even lines on both sides.
I. How to fix the tape-stitching presser foot
Fit the presser bar  into the slit and firmly tighten the presser foot screw
Turn the guide adjustment screw away from the user in a direction shown in (7) to increase the guide width.
Insert the tape from the corner (9) and turn it in the direction of arrow (10) to place it in position.
Turn the guide adjustment screw (5) toward the user in a direction shown in (8) to narrow the tape.
Loosen the stitch position adjustment  screw (6) and adjust the position of the tape guide (3) to place the cloth in position for being stitched. After the tape guide (3) is in position, tighten the stitch position adjustment screw (6)
Hold the tape and the cloth by both hands, and start stitching slowly at the beginning.
II. Selection of tape width
Selection of tape width is possible within 3 m/m - 20 m/m.
Use any prepared folded-in-three bias tape.
THIS FOOT FITS
HIGH SHANK
BABYLOCK
Bernina (Bernette), Brother, Pacesetter, Elna, Elna, Kenmore, Janome / New Home Juki, Pfaff,  Necchi, Nelco, Riccar, Simplicty, Singer, Viking, White and any other high shank sewing machines. Does not fit Kenmore super high shank machines
Babylock Sewing Machine Models:
BLQP.
Brother Sewing Machine Models:
PQ1300, PQ1500 & PQ1500S.
with Janome Sewing Machine Models:
1600P, 1600P-DB, 1600P-DBX, MC5000, MC5700, MC6600, MC8000, MC9000, MC10000 10001 & MC11000.
Juki Sewing Machine Models:
TL98Q, TL98QE & TL98E.
Pfaff Sewing Machine Models:
1200 Grand Quilter.